LIGHT MOD CLASS
No suicide Lincoln’s,imperials or Hearse cars.
Any year passenger car but must read the rules.
All cars must be stripped clean of all glass and plastic and carpet.
Gas tank must be removed from under the car.
Battery must be moved to front floorboard and strapped down good with a cover on it.
THIS IS ALL YOU CAN DO TO THIS CLASS.
If u run a 03 or newer the factory motor cradle must stay factory. Any motor and transmission.
Transmission cooler is allowed.
Motor cradle is allowed. No pulley protector if u have sway bar. DP are ok but firewall must be cut out and not touch DP at all. Needs to be at least 6″ from dash bar. If you have a middle bar that goes from dash bar to back seat bar It has to be at least 10″ off the transmission tunnel or you will have to cut it out or load car. Transmission protectors are allowed but tunnels cut out and can not touch nothing at all. The same with steal bealhousing. Can not touch nothing at all. AND CAN NOT LOCK TO CROSSMEMBER AT ALL. SO CUT THE EARS OFF OR LOAD YOUR CAR. Can not weld transmission brace to crossmember. Can be bolted with factory mount or float. Can not bind up in any way.
You can build a crossmember but no bigger than 2×2 square tubing.
You are allowed to cut and negative bend the box’s and weld back together with no added metal.
Any 5 lug rear end braced rear end is ok. 8 LUG REAR ENDS IS ALLOWED. Watts link kit is allowed but must be factory size. Or you will not run. If they are a coiled spring car must stay coiled if it is a leaf spring car must stay leaf spring.
Factory or aftermarket driveshaft is allowed.
Factory tie rod ends but center can be reinforced. Factory ball joints. Factory spindles. No aftermarket spindles.
Steering shaft can be aftermarket. Hydraulic or solid bar is allowed.
Any bumper is allowed but aftermarket bumpers better be within the spec’s of a factory one or you will not run.
16″ bumper bracket up to 3/8″ thick but must be welded to back of bumper. They can be on top or the side but only one per frame horn.
You are allowed 4 plates on a fresh car anywhere. 4x6x1/4″. Then you are allowed up to 6 more where it has bent on a pre run. You are only allowed up to 10 total and no more than that or you will be cutting plates off. All plates must have a 1″ gap between welds or you will be cutting them off.
The body mounts can be factory or be charged out to no bigger than 5/8 althread with a 1″ spacer.
CAGE- Full cage with 6 down tubes. And they must be straight up and down on outer frame rail. But all 6 down tubes must be 6″ behind Z-Box and 6″ in front of back arch. Door bars can not go back no more than 16″ behind back part of front seat. Dash bar. When you have a dash bar it has to be at least 12″ off the top of your bell housing. Bar behind seat. Gas tank protector has to be in center of seat bar and can only be 24″ wide and has to be at least 2″ from speaker deck. Not on top of speaker deck.
Roll over bar is MANDATORY
Doors can be welded solid.
Trunk can be bolted down with up to 6 bolts or welded 5 on 5 off. If you weld 5 on 5 off then you can only use 2 pieces of 3/4 althread going threw the frame. And I want 2 holes cut into trunk lid to see inside trunk. At least 6″ hole’s.
Hood can have up to 8 spots to bolt down hood. Only 2 going threw the frame up to 1″ althread. 6 others up to 3/4″ bolts but can not connect to frame. No more or you will cut.
You can shape the body seams but no welding.
You are allowed up to 10 fender bolts up to 3/8″ in size per fender.
WINDSHIELD BAR IS MANDATORY
ROOF SIGN IS MANDATORY
Any tire and wheels.
9 wire can be used up to 15 spots but not in the windows so we can get to you if we need to.
Stiffness of suspicion is up to the drivers.
You are allowed a chain or bolt or 1 strap up to 2″ wide and 4″ long to hold front a-arm down.
Firewall has to be removed behind motor.
If you have to cut anything you get one chance and it will be cut with no arguments.
ABSOLUTELY NO ALCHOHOL IN THE PITS OR YOU WILL BE REMOVED FROM THE PITS.
DON’T FORGET THAT THERE IS NO GREY AREA IN MY RULES. IF YOU TRY AND I DON’T LIKE IT YOU WILL HAVE THE OPTION TO CUT OR LOAD YOUR CAR.
Any questions call
573-578-6919 or message me.
Payout will not exceed 100% of admission.